Power LED |
|||||
---|---|---|---|---|---|
The Power LED will light blue when the device is connected to a power source. | |||||
PoE LED |
|||||
Green | Active 24V PoE | ||||
Link LED |
|||||
Green |
Link Established Flashing Indicates Activity |
||||
PoE In Port |
|||||
RJ45 port supports 10/100/1000 Ethernet connections and supports 24V, 2-pair passive PoE to power the switch. For maximum power consumption of 30W, we recommend supplying power with the POE-24-30W-G-WH PoE adapter (not included). | |||||
Ground Bonding Point |
|||||
The NanoSwitch must be grounded in one of the following ways:
|
|||||
PoE Out (Ports 1 - 3) |
|||||
RJ45 ports support 10/100/1000 Ethernet connections and provide passive 24V, 2-pair PoE passthrough for up to 30W PoE output.
|
Connect a Drain Wire (Optional)
If a drain wire is used to ground the NanoSwitch, attach it to the Ground Bonding Point with the Self-Tapping Screw and Nut.
Specifications
N-SW | |
Dimensions |
196.4 x 93.5 x 32.4 mm ( 7.73 x 3.68 x 1.28") |
---|---|
Weight |
271 g (9.6 oz) |
Enclosure Characteristics |
White Polycarbonate |
Total Non-Blocking Line Rate |
4 Gbps |
Typical Power Consumption |
1.5W |
Max. Power Consumption |
30W |
Power Method |
24V, 2-Pair Passive PoE |
Networking Interfaces |
(4) 10/100/1000 Mbps Ethernet RJ45 |
Total Passive PoE Max Wattage |
24V, 2-Pair, 1A for 3 Ports (30W) |
Passive PoE Max Wattage per Port |
24V, 2-Pair, 1A per Port (24W) |
Passive PoE Voltage Range |
21.6 - 30V |
ESD/EMP Protection |
± 24kV Air, ± 24kV Contact |
Operating Temperature |
-30 to 70° C (-22 to 158° F) |
Operating Humidity |
5 to 95% Noncondensing |
Certifications |
CE, FCC, IC |