|
Product Details:
|
| Brand Name: | UBNT | Model Number: | AF-24HD |
|---|---|---|---|
| Dimensions: | 593 X 768 X 370 Mm (23.35 X 30.24 X 14.57") | Operating Frequency: | 24.25 GHz |
| Max. Power Consumption: | < 50W | Data Port: | 10/100/1000 Ethernet Port |
| Weight: | 17.3 Kg (38.14 Lb) | Channel Bandwidth: | 100 MHz |
| Operating Temperature: | -40 To 55° C (-40 To 131° F) | Warranty: | 1 Year |
| High Light: | 24.25 GHz point to point wireless,58VDC point to point wireless,AIRFIBER Outdoor wireless point to point |
||
UBNT Networks AIRFIBER 24 GHz AF-24HD Outdoor Wireless Point to Point Radio
Installation Requirements
17 mm wrench
13 mm socket wrench or driver
Clear line of sight between airFiber radios
Clear view of the sky for proper GPS operation
Mounting location with < 0.5° displacement due to twist and sway under wind loading
Mounting point:
At least 1 meter below the highest point on the structure
For tower installations, at least 3 meters below the top of the tower
Ground wires – min. 8 AWG (10 mm2) and max. length: 1 meter. As a safety precaution, ground the airFiber radios to grounded masts, poles, towers, or grounding bars.
|
|
WARNING: Failure to properly ground your airFiber units will void your warranty. |
|---|
(Recommended) 2 Outdoor Gigabit PoE surge protectors – Ubiquiti® Ethernet Surge Protector, model ETH-SP-G2.
|
|
Note: For guidelines about grounding and lightning protection, follow your local electrical regulatory codes. |
|---|
Outdoor, shielded Category 5e (or above) cabling and shielded RJ-45 connectors should be used for all wired Ethernet connections. Category 6 is required for installations with long cable runs (up to 100 m).
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti.
Specifications
|
airFiber AF-24HD |
|
|
Dimensions |
593 x 768 x 370 mm (23.35 x 30.24 x 14.57") |
|---|---|
|
Weight |
17.3 kg (38.14 lb) |
|
Operating Frequency |
24.05 – 24.25 GHz |
|
GPS |
GPS Clock Synchronization |
|
EIRP |
~33 dBm (FCC/IC), ~20 dBm (CE) |
|
Frequency Accuracy |
± 2.5 ppm without GPS Synchronization |
|
Channel Bandwidth |
100 MHz |
|
Max. Power Consumption |
< 50W |
|
Power Supply |
50V, 1.2A PoE Gigabit Adapter (Included) |
|
Power Method |
Passive Power over Ethernet (42-58VDC) |
|
Certifications |
CE, FCC, IC |
|
Mounting |
Pole Mount Kit (Included) |
|
Operating Temperature |
-40 to 55° C (-40 to 131° F) |
|
Integrated Split Antenna |
|
|
TX Gain |
33 dBi |
|
RX Gain |
40 dBi |
|
Beamwidth |
< 3.5° |
|
Front-to-Back Ratio |
70 dB |
|
Polarity |
Dual-Slant Polarization |
|
Cross-Polarity Isolation |
> 28 dB |
|
Networking Interface |
|
|
Data Port |
(1) 10/100/1000 Ethernet Port |
|
Configuration Port |
(1) 10/100 Ethernet Port |
Contact Person: Helen
Tel: +8613590164558
