Installation Requirements
-
Phillips screwdriver (for shelf or wall mounting)
-
(Optional) 42 to 56VDC power source, such as the EdgePower™ EP-54V-150W, for stand-alone DC power or redundant power backup.
-
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
-
For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti.
|
System LED |
|||
|---|---|---|---|
|
|||
|
Flashing White |
Bootup in progress. |
||
|
White |
Ready for use, not connected to Ubiquiti® Network Management System (UNMS™). See “UNMS Management”. |
||
|
Blue |
Ready for use, connected to UNMS. |
||
|
Steady Blue with Occasional Flashing |
Ready for use, unable to connect to UNMS, check connection to UNMS server. |
||
|
Quickly Flashing Blue |
Used to locate a device in UNMS. |
||
|
Alternating |
Firmware upgrade in progress. |
||
|
RJ45 PoE LED (Ports 1 - 8) |
|||
|
Off |
No PoE |
||
|
Amber |
IEEE 802.3af/802.3at |
||
|
Green |
24V Passive |
||
|
RJ45 Speed/Link/Activity LED (Ports 1 - 8) |
|||
|
Off |
No Link |
||
|
Amber |
Link Established at 10/100 Mbps Flashing Indicates Activity |
||
|
Green |
Link Established at 1000 Mbps (1 Gbps) Flashing Indicates Activity |
||
|
SFP Speed/Link/Activity LED (Ports 1 - 2) |
|||
|
Off |
No Link |
||
|
Green |
Link Established at 1 Gbps Flashing Indicates Activity |
||
|
RJ45 (Ports 1 - 8) |
|||
|
RJ45 ports support 10/100/1000 Ethernet connections and configurable Power over Ethernet (auto PoE+ or 24V Passive). |
|||
|
SFP (Ports 1 - 2) |
|||
|
Hot-swappable SFP ports support 1 Gbps connections. |
|||
|
Reset Button |
|||
|
Click here to learn how to reset an EdgeSwitch to factory defaults. |
|||
|
Console Port |
|||
|
RJ45 serial console port for Command Line Interface (CLI) management. |
|||
|
DC Input |
|||
|
Optional DC input for connecting a redundant or stand-alone 42 to 56VDC power source, such as the EdgePower EP-54V-150W.
|
|||
|
AC Power Port |
|||
|
Connect the included Power Cord to the AC Power port. |
|||
|
Ground |
|||
|
Ground bonding point for an optional ground wire. |
|||
Specifications
|
ES-8-150W |
|
|
Dimensions |
204 x 43 x 235 mm (8.03 x 1.69 x 9.25") |
|---|---|
|
Weight |
|
|
Without Wall Mount |
1.72 kg (3.79 lb) |
|
With Wall Mount |
1.8 kg (3.96 lb) |
|
Total Non-Blocking Line Rate |
10 Gbps |
|
Max. Power Consumption |
20W (Excludes PoE Output) |
|
Power Method |
|
|
AC |
AC/DC Integrated PSU, Universal Input |
|
DC |
DC External, (Self-Correcting Polarity Protection) Terminal Block Input |
|
Power Supply |
Internal AC/DC 150W |
|
Operating Voltage |
|
|
AC |
100 to 240VAC, 50-60 Hz |
|
DC |
42 to 56VDC |
|
LEDs |
|
|
System |
Status |
|
RJ45 Data Ports |
PoE; Link/Speed/Activity |
|
SFP Data Ports |
Link/Speed/Activity |
|
Networking Interfaces |
(8) 10/100/1000 Mbps RJ45 Ports (2) 1 Gbps SFP Ports |
|
Management Interface |
(1) RJ45 Serial Port, |
|
PoE Interfaces |
(8) IEEE 802.3at/af 2-Pair (+1, 2; -3, 6) (8) 24V/0.7A 2-Pair (+4, 5; -7, 8) |
|
ESD/EMP Protection |
± 24kV Air, ± 24kV Contact |
|
Operating Temperature |
|
|
Internal AC/DC @ 150W |
-25 to 45° C (-13 to 113° F) |
|
Internal AC/DC @ 100W |
-25 to 55° C (-13 to 131° F) |
|
External DC |
-25 to 60° C (-13 to 140° F) |
|
Operating Humidity |
5 to 95% Noncondensing |
|
Certifications |
CE, FCC, IC |
