Product Details:
|
Model Number: | TN58NS4T51 | Brand: | HuaWei |
---|---|---|---|
Application: | FTTH FTTB FTTX Network | Regenerating Rate: | 100Gbit/s |
Frequency: | 50GHz | WDM Specification: | 2.56 Tbit/s. |
Power Supply: | Supports ITU-T G.694.1-compliant DWDM Specifications. | Warranty: | 1 Year |
High Light: | TN58NS4T51,GPON Optical Line Terminal Processing Board,HuaWei OSN 8800 Processing Board |
TN58NS4T51 GPON Optical Line Terminal Processing Board 03031EQH HuaWei OSN 8800
Description of TN58NS4T51
The NS4 board has four functional versions: TN54, TN56, TN57 and TN58.
Mapping Between the Board and OptiX OSN 9800 Universal Platform Subrack
The following provides the board(s) supported by the product. However, the availability of the board(s) is subject to PCNs. For PCN information, contact the product manager at your local HW office.
Specifications of TN58NS4T51
Original Board | Substitute Board | Substitution Rules |
TN54NS4 | TN56NS4/TN57NS4 |
The TN56NS4/TN57NS4 can be created as 54NS4(REG) on the NMS. The former can substitute for the latter, without any software upgrade. After substitution, the TN56NS4/TN57NS4 functions as the TN54NS4. NOTE: TN56NS4: When both the receive and transmit boards employ SDFEC, the substitution applies. TN57NS4: when both the receive and transmit boards employ HFEC, the substitution applies. |
TN56NS4 | None | - |
TN57NS4 | TN58NS4 |
The TN58NS4 can be created as 57NS4 on the NMS. The former can substitute for the latter, without any software upgrade. A TN58NS4 board occupies one slot, and a TN57NS4 board occupies two slots. To use a TN58NS4 board to substitute for a TN57NS4 board, install the TN58NS4 board into the right-side slot of the two slots that the TN57NS4 board originally occupies and keep the left-side slot of them vacant. After substitution, the TN58NS4 functions as the TN57NS4. NOTE: When both the transmit and receive boards use SDFEC2 encoding and are of the same type, they can substitute for each other. The TN57NS4 board cannot be replaced with the TN58NS4T62 and TN58NS4T50 board. |
TN58NS4 | None | - |
Function and feature | Description | ||
---|---|---|---|
Basic function | The board is used in an electrical REG station in the system to implement electrical regeneration of optical signals. | ||
Regenerating rate | OTU4: OTN service at a rate of 111.81 Gbit/s | ||
OTN function |
|
||
WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. | ||
Tunable wavelength function | The board can tune the optical signal output on the WDM side within the range of 80 wavelengths in C-band with the channel spacing of 50 GHz. | ||
ESC function | Supported | ||
PRBS function | Not supported | ||
FEC coding |
TN54NS4: Supports HFEC and SDFEC on the WDM side. TN56NS4: Supports SDFEC on the WDM side. TN57NS4: Supports HFEC and SDFEC2 on the WDM side. TN58NS4: Supports SDFEC2 on the WDM side.NOTE:
Boards that use different FEC modes cannot interconnect with each other.
|
||
Alarms and performance events monitoring |
|
Functions and features of the NS4 board (Line Mode)
Function and feature | Description | ||||||
---|---|---|---|---|---|---|---|
Basic function |
NS4 converts signals as follows: 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU4<->1xOTU4 Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and ODU3 signals. |
||||||
Cross-connect capabilities | Supports the cross-connection of 80 channels of ODU0/ODUflex signals or 40 channels of ODU1 signals or ten channels of ODU2/ODU2e signals or two channels of ODU3 signals or one channel of ODU4 signals between the NS4 and the cross-connect board. | ||||||
OTN function |
|
||||||
WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. | ||||||
Tunable wavelength function | The board can tune the optical signal output on the WDM side within the range of 80 wavelengths in C-band with the channel spacing of 50 GHz. | ||||||
ESC function | Supported | ||||||
PRBS function | Supports the PRBS function on the WDM side. | ||||||
LPT function | Not supported | ||||||
FEC coding |
TN54NS4: Supports HFEC and SDFEC on the WDM side. TN56NS4: Supports SDFEC on the WDM side. TN57NS4: Supports HFEC and SDFEC2 on the WDM side. TN58NS4: Supports SDFEC2 on the WDM side. NOTE:
Boards that use different FEC modes cannot interconnect with each other.
|
||||||
Alarms and performance events monitoring |
|
||||||
Regeneration board |
The WDM-side signals from an NS4 board can be regenerated by another NS4 board or an LTX board of the same type. For example,
|
||||||
ALS function | Not supported | ||||||
Latency measurement |
|
||||||
Test frame | Not supported | ||||||
IEEE 1588v2 | Not supported | ||||||
Physical clock | Not supported | ||||||
Optical-layer ASON | Supported | ||||||
Electrical-layer ASON | Supported | ||||||
Protection scheme |
NOTE:
When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection and ODUk SPRing protection.
|
||||||
Loopback | WDM side Loopback | ODU0 Channel Loopback | ODU1 Channel Loopback | ODU2 Channel Loopback | ODU3 Channel Loopback | ODUflex Channel Loopback | |
Supported | Supported | Supported | Supported | Supported | Supported | ||
Protocols or standards compliance | Protocols or standards for transparent transmission (non-performance monitoring) |
IEEE 802.3u IEEE 802.3z IEEE 802.3ae IEEE 802.3ba ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface SMPTE 297-2006 Serial Digital Fiber Transmission System for SMPTE 259M, SMPTE 344M, SMPTE 292 and SMPTE 424M Signals NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) ANSI X3.139 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Media Access Control (MAC) ANSI X3.148 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Physical Layer Protocol (PHY) ANSI X3.166 Information Systems - Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM) |
|||||
Protocols or standards for service processing (performance monitoring) |
ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.873.1 ITU-T G.694.1 |
FAQ
Q1. What is your main product?
A1: Our main products include:Huawei, ZTE, CISCO HP H3C HUAWEI ZTE UBNT Mikrotik fiberhome...Network products.
Q2. Can you provide a complete solution such as FTTH / FTTB?
A2. Yes, we also provide all products (at competitive prices.
Q3. Can you provide technical support?
A3. Yes, we have engineers to provide 24-hour technical support.
Q4. Can you OEM/ODM for us? Including packaging?
A4. Yes of course. But a minimum order quantity is required.
Q5. I don't have a courier account, can you calculate the shipping cost for me?
A5 No problem, we have cooperated with many freight forwarders to provide competitive freight, whether you want to ship by DHL / FedEx / TNT / UPS or by air or ship, we can meet your requirements.
Q6. Can we lower the price? Is there any discount?
A6. Yes, the price is not a problem, everything can be negotiated according to the quantity.
Q7. How about the warranty?
A7. 1 year
Q8. What is the delivery time of my order?
A8. 3-5 working days for sample order; bulk order within 5-8 working days after receipt of payment.
Our service
1. Respond to your inquiry within 24 hours.
2. Feedback and complaints within 24 hours.
3. EM/ODM is welcomed.
4. The product has a 1-year warranty.
5. Welcome local exclusive agent.
Contact Person: Helen
Tel: +8613590164558