| 1 | USB interface (Host) | 2 | 2 LTE ANTENNAS |
| 3 |
CON/AUX INTERFACE Illustrate:
THE AR161FG-L DOES NOT SUPPORT AUX FUNCTIONALITY. |
4 | WAN side interface: GE Combo interface |
| 5 |
LAN SIDE INTERFACE: 4 GE ELECTRICAL CONNECTORS Illustrate:
|
6 |
RESET BUTTON Illustrate:
Reset button for manual resetting the device.
|
| 7 |
Power connector supported power modules:
|
8 |
Power cord tamper-evident snap-on mounting holes Illustrate:
insert the power cord anti-loosening snap to bind the power cord to prevent the power cord from loosening. |
| 9 | Product model silk screen printing | 10 |
Pick-up point Illustrate:
use grounding cables to reliably ground the device for lightning protection and interference protection. |
| 11 | LTE ANTENNA INTERFACE | 12 |
2 SIM CARD SLOTS Illustrate:
|
Interface description
CON/AUX INTERFACE
|
Attribute |
Description |
|---|---|
| Connector type | RJ45 |
| Complies with standards | RS232 |
| Working mode | Duplex UART (Universal Asynchronous Receiver/Transmitter) |
| The data device type |
|
| Cable type | Console configuration cables |
USB interface (Host)
|
Attribute |
Description |
|---|---|
| Connector type | TYPE A |
| Complies with standards | USB2.0 |
| Working mode | Host |
LTE ANTENNA INTERFACE
|
Attribute |
Description |
|---|---|
| Connector type | SMA-K (MALE THREAD + INNER HOLE) |
| Interface standards and support bands |
|
| Support rates |
|
| Cable type | LTE WHIP ANTENNA |
GE ELECTRICAL INTERFACE
|
Attribute |
Description |
|---|---|
| Connector type | RJ45 |
| Interface properties |
MDI/MDIX Illustrate:
|
| Complies with standards | IEEE802.3,IEEE802.3u,IEEE802.3ab |
| Support frame formats | Ethernet_II,Ethernet_SAP,Ethernet_SNAP |
| Supports network protocols | IP |
| Cable type | Ethernet cable |
GE Combo interface
Ge Combo interface, also known as photoelectric multiplexing interface, is composed of two Ethernet ports on the device panel (one is an optical port and the other is an electrical port), and there is only one forwarding interface inside the device. Combo port and its corresponding optical port is logically photoelectric multiplexed, the user can choose one of them according to the actual networking situation, but the two can not work at the same time. When one of these interfaces is activated, the other interface is automatically disabled.
- Ge electrical interface (10/100/1000Mbit/s adaptive) is mainly used for the reception and transmission of 100 Mbit/100 Mbit/Gigabit services, and requires the use of Ethernet cables
- GE Optical Interface (100/1000Mbit/s Adaptive) is mainly used for the reception and transmission of 100 Mbit/Gigabit services, and requires the use of optical fiber and GE eSFP package optical transceivers andFE SFP/eSFP package optical modules.
Specifications
|
Project |
Description |
|---|---|
| Processor | Dual-core 533MHz |
| Memory | 512MB |
| Flash | 512MB |
| Micro SD card (default sd1) | Not |
| Hard disk | Not supported |
| Dimensions (w× d× h) |
|
| Weight | 2.8kg |
| RATED INPUT VOLTAGE (AC) | 100V AC~240V AC,50Hz/60Hz |
| MAXIMUM INPUT VOLTAGE (AC) | 90V AC~264V AC,47Hz~63Hz |
| Maximum output current | 2A |
| Maximum output power | 540 |
| RPS POWERED | Not supported |
| PoE powered | Not supported |
| Maximum power consumption | 17W |
| Fan | Not |
| Duct (front panel) | Not |
| Management interface | 1 PCS(RJ45) |
| CON/AUX INTERFACE | 1 PCS(RJ45) |
| USB 2.0 INTERFACE | 1 pcs |
| Service interfaces come standard |
WAN side interface: 1 GE Combo interface, 2 LTE antenna interfaces. LAN SIDE INTERFACE: 4 GE ELECTRICAL INTERFACES, GE0 LAN INTERFACE CAN BE SWITCHED TO WAN INTERFACE. |
| Expansion slots | Not supported |
| Operating altitude | Less than 5000m |