|
Product Details:
|
| Brand Name: | UBNT | Model Number: | R2AC |
|---|---|---|---|
| Dimensions: | 88 X 40 X 230 Mm (3.47 X 1.58 X 9.06") | Networking Interface: | 10/100/1000 Ethernet Port |
| Power Supply: | 24V, 0.5A Gigabit PoE Adapter (Included) | Power Input: | 8.5W |
| Weight: | 400 G (14.11 Oz) | LEDs: | Power, LAN, |
| Max. Power Consumption:: | 9.5W | Warranty: | 1 Year |
| High Light: | Rocket2ac Prism Wireless Bridge,802.11ac Prism Wireless Bridge,R2AC GPS Wireless Surveillance System |
||
UBNT Rocket2ac Prism wireless bridge R2AC GPS 2.4G 802.11ac backbone transmission
Installation Requirements
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
|
RP-SMA Antenna Connectors |
|---|
| Used to attach RF cables (not included). |
|
GPS Antenna Connector |
| Used to attach the GPS Antenna. |
|
LEDs |
|
Signal In airOS®, you can modify the wireless signal strength threshold values for each LED on the Wireless tab under Signal LED Thresholds. Each LED will light when the wireless signal strength is equal to or greater than the LED’s threshold value.
GPS The GPS LED will light steady blue when the GPS signal strength is sufficient. This requires a minimum of three satellite connections. LAN The LAN LED will light steady blue when an active Ethernet connection is made to the LAN port and flash when there is activity. Power The Power LED will light blue when the device is connected to a power source. |
|
Reset Button |
| To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the device is already powered on. Alternatively, the device may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter. |
|
LAN |
| The Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. |
Contact Person: Helen
Tel: +8613590164558
